The BAXI Wifi USB WIFI AC adapter connects Anori series split units for remote control. App: My Baxi AC / De Dietrich Smart AC Pairing: guided, simply restart the device and follow the app's instructions Systems: compatible with Android and iOS Recycling: the device, its accessories and cables are recyclable
PANASONIC PAW-RC2-MBS-1 adapter from the WiFi controllers and interfaces range. It connects the indoor unit to the MODBUS RTU communication protocol, making it easier to integrate the Panasonic air conditioner or heat pump into a building management or supervision system.
The AIRZONE white bus cable is a shielded, twisted cable for data, signal and power transmission to Airzone system elements, supplied in a 100 m roll. Communication section : shielded twisted 2x0.22 mm2 (blue-green). Power section : 2x0.50 mm2 (red-black). Conductor : polished copper with PVC/A insulation. Electrical ratings : service voltage 300 V, maximum current 3.5 A. Classification : CPR Eca. Essential for wiring Airzone zoning installations.
This COOLFRANCE exhaust hose for portable air conditioners has a diameter of 150 mm and a length of 3 metres. It is used to vent the hot air extracted by the unit to the outside, typically through a window or a wall opening.
Flexible exhaust hose for portable air conditioners, venting the unit's hot air outdoors. Diameter : 130 mm Length : 3 meters, a generous length that makes it easier to position the air conditioner in the room Connection : to the unit's hot air outlet Venting : through a partly open window or a wall grille Ideal for replacing a worn or too-short original hose.
PANASONIC CZ-140DRS1 drain kit, designed for condensate evacuation from air conditioning units. Compatibility : units rated at 10 kW. It provides a reliable, leak-tight connection for draining condensation water. An essential accessory to complete the installation of a PANASONIC air conditioning or heat pump system.
PANASONIC CZ-50DRS1 condensate drain kit, designed for air conditioning units from 5.0 to 7.1 kW. It allows a clean connection of the condensate drain on Panasonic indoor units, making installation easier and ensuring reliable drainage of condensation water.
The MITSUBISHI ELECTRIC Drain Kit MITSUBISHI PAC-SG61DS-E is a drain connection kit (drain socket) for Mitsubishi outdoor units. Compatibility — the MXZ-8A140VA, PUHZ-RP35/50/60/71/100/125/140VHA4/VKA/YKA, PUHZ-HRP71/100/125VHA2 and PUHZ-P100/125/140/200/250 models, as well as the PUHZ-P, PUHZ-SHW, PUZ-ZM60~140 and PUZ-M ranges. Contents — 1 drain socket, 5 drain plugs, 3 thermal insulators and 8 clamps, made of EPT rubber. Connection — to a PVC VP-25 drain pipe or a 25 mm internal-diameter vinyl hose. Restriction — must not be used in cold climates due to the risk of freezing.
The Mitsubishi Electric PAC-SJ08DS-E drain kit caps unused drain holes on the outdoor unit and centralizes condensate drainage. Material: EPT rubber Compatibility: PUHZ-ZRP35VKA and PUHZ-ZRP50VKA outdoor units Connection: fits a PVC VP-25 drain pipe or a vinyl hose with a 25 mm internal diameter Supplied with: one drain fitting Not recommended for cold climates, as the drain pipe could freeze.
DAIKIN EKDK04 drain kit, an accessory for condensate drainage from the Daikin Altherma outdoor unit. It includes 2 plugs with gaskets, 1 adapter for the drain pipe, sealing putty for joints, and an electrical plug. A complete kit for connecting and sealing the outdoor unit's condensate drainage.
COOLFRANCE Ø 25 mm grey rigid PVC drain pipe, sold by the metre. It is used to drain condensate produced by air conditioners to the outside or into the drainage network. Its rigid PVC construction provides good mechanical strength and a long-lasting installation.
The COOLFRANCE grey rigid PVC drain pipe Ø 20 mm forms the main line for evacuating condensate from an air conditioner or heat pump. Sold by the metre, it connects with elbows and T-fittings of the same diameter to build a rigid, sturdy and easy-to-install drainage network.
The COOLFRANCE white rigid PVC drain pipe Ø 20 mm is used to drain condensate from air conditioners along straight, exposed runs. Its rigid material makes it a durable, easy-to-connect solution for drainage lines. Sold by the metre in even quantities, it complements air conditioning installations.
The COOLFRANCE grey rigid PVC drain T-fitting Ø 25 mm is used to split or connect a condensate drain line for air conditioning. It creates a clean branch in a network of rigid pipes, making installation and maintenance of condensation water drainage easier.
The COOLFRANCE grey rigid PVC drain T-fitting Ø 20 mm is used to split or connect a condensate drain line for air conditioning. It creates a clean branch in a network of rigid pipes, making installation and maintenance of condensation water drainage easier.
The COOLFRANCE white rigid PVC drain T-fitting Ø 20 mm is used to split or connect a condensate drain line for air conditioning. It creates a clean branch in a network of rigid pipes, making installation and maintenance of condensation water drainage easier.
The COOLFRANCE grey PVC 45° drain elbow Ø 20 mm is a plumbing fitting for air conditioner condensate drain lines. Angle: its 45° angle changes the pipe's slope without creating a sharp bend that could cause clogging Installation: fits into tight duct runs Packaging: sold as a pack of 2 units A small but essential accessory for neatly finishing an air conditioning installation.
The COOLFRANCE grey PVC 90° drain elbow Ø 25 mm connects and redirects the condensate drain line of an air conditioner. Its right angle makes it easy to route the pipe around corners and along walls for a clean evacuation of condensation water.